Usage Method:
1. Pairing:
Press and hold the button on the receiver for 5 seconds until the indicator goes off. And then press the button of remote control which should be matched, the receiver light flashes. And then press on the designated button of receiver, if the indicator light flash, the pairing is successful. (Note: This receiver should be our company's intelligent switches or sockets and other products)
2. Circuit switch:
Press on the button of the remote control, the corresponding product to accept open, press again is off. (With the company's intelligent switches, sockets, and other family use)
3. Single-cycle control output:
Press the button on the remote control, the curtain rises, press the second button, the curtain stops; press the third button, the curtain falls. (With the company's series of electric curtains used)
4. Cycle electric output work:
Press the button on the remote control, the module outputs the electrical closed signal control equipment. (With the company's electric door series use)
