Installation Method:
1. Cut off the power, uninstall the original switch;
2. Insert a flat-blade screwdriver into the opening below the switch and rotate to remove the switch panel;
3. Properly connect the power line according to the label on the fuselage label;
4. With a screwdriver to zero-fire switch fixed in the switch box, and install the switch panel.
Product Pairing:
1.Pairing
Press and hold the button for 5 seconds until the indicator goes out. And then press the button of remote control whitch need to be matched, zero-fire flat panel switch light flash. And then press the zero-fire flat panel switch on the designated button, if the indicator light flash, the pairing is successful.
2: Delete the pairing
Press and hold the button for 5 seconds until the indicator goes out. And then press the button of remote control whitch need to be matched, zero-fire flat panel switch light flashes, and then press the free stickers (or remote control) need to match the button, zero-fire switch lights flashing flat panel Two. Finally, press the designated button on the zero-fire switch, if the indicator light flash, delete the pairing successfully
3: Remove all pairing
Press and hold the button for 5 seconds until the indicator goes out. And then press and hold the button for 5 seconds, if the indicator light flash, then delete the pairing successfully
Usage Method
1.Local ControlPress on the button of switch panel,output is on; press again output is off
2.Remote Control: it receives any order of single-key switch, main switch.
